Tripp Lite by Eaton HDBaseT HDMI over Cat5e/6/6a Extender Kit with Ethernet, Serial and IR Control, 1080p, Up to 500 ft. (152 m), TAA

The Tripp Lite by Eaton HDBaseT HDMI Extender Kit is a high-performance solution for extending uncompressed HDMI video and audio, along with RS-232 serial and IR remote control signals, over a single Cat5e/6/6a cable. Designed for reliable long-range distribution, this 1080p HDBaseT extender delivers crystal-clear video up to 500 feet (152 meters) from the source to the display, while preserving full HD audio and enabling convenient control of connected devices. Built for professional environments and home theaters alike, this kit is TAA-compliant and ready for a wide range of AV installations that demand simplicity, scalability, and quality in one compact package.

• Uncompressed HDMI video and audio extended up to 500 feet (152 meters) over a single Cat5e/6/6a cable, preserving full 1080p at 60 Hz for pristine picture quality.
• Integrated control options including RS-232 serial and IR pass-through, enabling seamless remote equipment control from the display side without adding extra cabling or interfaces.
• Ethernet pass-through through the HDBaseT link, allowing network connectivity for networked displays, streaming devices, or control systems as part of a unified AV setup.
• Two-piece transmitter and receiver design supports flexible placement — source near the display, or in a centralized equipment rack — with straightforward, plug-and-play installation.
• Rugged, enterprise-grade engineering with TAA compliance, ideal for corporate conference rooms, classrooms, digital signage, and home theater environments requiring professional-grade AV distribution over long distances.

Technical Details of Tripp Lite by Eaton HDBaseT HDMI over Cat5e/6/6a Extender Kit with Ethernet, Serial and IR Control

• Model: BHDBT-K-E3SI-ER (HDBaseT HDMI Extender Kit)
• Supports HDMI video and audio extension via HDBaseT over a single Cat5e/6/6a cable
• Maximum resolution supported: 1920 x 1080 (1080p) at 60 Hz
• Extension distance: Up to 500 feet (152 meters)
• Signal types extended: HDMI (uncompressed) + audio, RS-232 serial, IR remote control, and Ethernet
• Cable requirement: Standard Cat5e/6/6a twisted-pair cable
• Compliance: TAA (Trade Agreements Act) compliant for government and enterprise deployments
• Form factor: Transmitter and Receiver units designed for versatile placement and easy integration into existing AV racks or shelves

how to install Tripp Lite HDBaseT Extender Kit

• Place the transmitter near your HDMI source (Blu-ray player, media streamer, PC, etc.). Connect the source’s HDMI output to the transmitter’s HDMI input, then connect the transmitter to its power supply if required by your installation.
• Run a single Cat5e/6/6a cable from the transmitter’s HDBaseT output to the receiver’s HDBaseT input. Ensure the cable length does not exceed 500 feet (152 meters) for reliable performance.
• Position the receiver near your display (TV or projector). Connect the receiver’s HDMI output to the display’s HDMI input. Connect any stereo or multichannel audio options as needed on the display side (if supported by your gear).
• Connect RS-232 and IR control lines as needed: connect a serial device or control system to the transmitter’s RS-232 port, and configure the IR emitters on the receiving end to control the display or source from the remote location (or use the built-in IR passthrough features as per your system design).
• Power up the system. If your installation requires external power supplies for the transmitter or receiver, plug in the adapters and verify that all indicators show normal operation. Test source-to-display signal integrity, adjust any necessary EDID or CEC settings, and verify RS-232 and IR control functionality from the remote location.

Frequently asked questions

• Q: What is the maximum distance this extender can cover?
• A: The extender supports a distance of up to 500 feet (152 meters) over a single Cat5e/6/6a cable.
• Q: What video resolution can I expect?
• A: It supports uncompressed HDMI video up to 1920 x 1080 (1080p) at 60 Hz, preserving full HD image quality from source to display.
• Q: Does the system carry Ethernet data over the HDBaseT link?
• A: Yes. In addition to HDMI, audio, RS-232, and IR, the HDBaseT link also enables Ethernet pass-through for network connectivity between the source/display and network-enabled devices or control systems.
• Q: How many components are in the kit and what do they do?
• A: The kit comprises a transmitter unit and a receiver unit. The transmitter takes the HDMI source (and RS-232/IR signals if used) and transmits them over Cat5e/6/6a to the receiver, which then outputs HDMI to the display and surfaces control signals to the source as configured.
• Q: Is this product suitable for professional AV deployments?
• A: Yes. It is designed for enterprise and pro AV environments, including classrooms, conference rooms, digital signage, and any setting requiring long-distance HDMI extension with integrated control and network pass-through. It is TAA-compliant to meet government procurement requirements.